tansri__muliani.jpg){kind=link}
tansri__muliani.jpg){kind=link}
steven__henry.jpg){kind=link}
tansri__muliani.jpg){kind=link}
millerhare-rafaelvinoly.jpg){kind=link}
philoldfield.jpg){kind=link}
philoldfield.jpg){kind=link}
Filter by
4910
Global
Height rank
Height rank
20 Fenchurch Street
London
- Facts
-
Metrics
You must be a CVU Member to view this resource.
Height
160.1 m
/ 525 ft
Floors
36
Official Name
The current legal building name.
20 Fenchurch Street
Other Names
Other names the building has commonly been known as, including former names, common informal names,
local names, etc.
The Walkie Talkie, 13-23 Fenchurch Street
Type
CVU collects data on two major types of tall structures: 'Buildings' and 'Telecommunications /
Observation Towers.' A 'Building' is a structure where at least 50% of the height is occupied by usable
floor area. A 'Telecommunications / Observation Tower' is a structure where less than 50% of the
structure's height is occupied by usable floor area. Only 'Buildings' are eligible for the CVU
'Tallest Buildings' lists.
Building
Status
Completed
Architecturally Topped Out
Structurally Topped Out
Under Construction
Proposed
On Hold
Never Completed
Vision
Competition Entry
Canceled
Proposed Renovation
Under Renovation
Renovated
Under Demolition
Demolished
Completed
Completion
2014
Country
CVU follows the United Nations's definition of Country, and thus
uses the lists and codes established by that organization.
City
CVU follows the United Nations's definition of City, and thus uses the
lists and codes established by that organization.
Address
Function
A single-function tall building is defined as one where 85% or more of its usable floor area is
dedicated to a single usage. Thus a building with 90% office floor area would be said to be an
"office" building, irrespective of other minor functions it may also contain.
A mixed-use tall building contains two or more functions (or uses), where each of the functions occupy a significant proportion of the tower's total space. Support areas such as car parks and mechanical plant space do not constitute mixed-use functions. Functions are denoted on CVU "Tallest Building" lists in descending order, e.g., "hotel/office" indicates hotel function above office function.
A mixed-use tall building contains two or more functions (or uses), where each of the functions occupy a significant proportion of the tower's total space. Support areas such as car parks and mechanical plant space do not constitute mixed-use functions. Functions are denoted on CVU "Tallest Building" lists in descending order, e.g., "hotel/office" indicates hotel function above office function.
Office
Structural Material
All-Steel
Both the main vertical/lateral structural elements and the floor spanning systems are constructed from steel. Note that a building of steel construction with a floor system of concrete planks or concrete slab on top of steel beams is still considered an “all-steel” structure as the concrete elements are not acting as the primary structure.
All-Concrete
Both the main vertical/lateral structural elements and the floor spanning systems are constructed from concrete which has been cast in place and utilizes steel reinforcement bars and/or steel reinforced concrete which has been precast as individual components and assembled together on-site.
All-Timber
Both the main vertical/lateral structural elements and the floor spanning systems are constructed from timber. An all-timber structure may include the use of localized non-timber connections between timber elements. Note that a building of timber construction with a floor system of concrete planks or concrete slab on top of timber beams is still considered an “all-timber” structure as the concrete elements are not acting as the primary structure.
Mixed-Structure
Utilizes distinct systems (e.g. all-steel, all-concrete, all-timber), one on top of the other. For example, a Steel Over Concrete indicates an all-steel structural system located on top of an all-concrete structural system, with the opposite true of Concrete Over Steel.
Composite
A combination of materials (e.g. steel, concrete, timber) are used together in the main structural elements. Examples include buildings which utilize: steel columns with a floor system of reinforced concrete beams; a steel frame system with a concrete core; concrete-encased steel columns; concrete-filled steel tubes; etc. Where known, the CVU database breaks out the materials used within a composite building’s primary structural elements.
Both the main vertical/lateral structural elements and the floor spanning systems are constructed from steel. Note that a building of steel construction with a floor system of concrete planks or concrete slab on top of steel beams is still considered an “all-steel” structure as the concrete elements are not acting as the primary structure.
All-Concrete
Both the main vertical/lateral structural elements and the floor spanning systems are constructed from concrete which has been cast in place and utilizes steel reinforcement bars and/or steel reinforced concrete which has been precast as individual components and assembled together on-site.
All-Timber
Both the main vertical/lateral structural elements and the floor spanning systems are constructed from timber. An all-timber structure may include the use of localized non-timber connections between timber elements. Note that a building of timber construction with a floor system of concrete planks or concrete slab on top of timber beams is still considered an “all-timber” structure as the concrete elements are not acting as the primary structure.
Mixed-Structure
Utilizes distinct systems (e.g. all-steel, all-concrete, all-timber), one on top of the other. For example, a Steel Over Concrete indicates an all-steel structural system located on top of an all-concrete structural system, with the opposite true of Concrete Over Steel.
Composite
A combination of materials (e.g. steel, concrete, timber) are used together in the main structural elements. Examples include buildings which utilize: steel columns with a floor system of reinforced concrete beams; a steel frame system with a concrete core; concrete-encased steel columns; concrete-filled steel tubes; etc. Where known, the CVU database breaks out the materials used within a composite building’s primary structural elements.
Concrete-Steel Composite
Energy Label
BREEAM Excellent
Official Website
Height
Architectural
Height is measured from the level of the lowest, significant, open-air, pedestrian entrance to
the architectural top of the building, including spires, but not including antennae, signage,
flag poles or other functional-technical equipment. This measurement is the most widely utilized
and is employed to define the Council on Vertical Urbanism (CVU) rankings of
the "World's Tallest Buildings."
160.1 m / 525 ft
To Tip
Height is measured from the level of the lowest, significant, open-air, pedestrian entrance to
the highest point of the building, irrespective of material or function of the highest element
(i.e., including antennae, flagpoles, signage and other functional-technical equipment).
160.1 m
/ 525 ft
Occupied
Height is measured from the level of the lowest, significant, open-air, pedestrian entrance to
the highest occupied floor within the building.
139.2 m
/ 457 ft
Floors Above Ground
The number of floors above ground should include the ground floor level and be the number of main
floors above ground, including any significant mezzanine floors and major mechanical plant floors.
Mechanical mezzanines should not be included if they have a significantly smaller floor area than
the major floors below. Similarly, mechanical penthouses or plant rooms protruding above the general
roof area should not be counted. Note: CVU floor counts may differ from published accounts, as it
is common in some regions of the world for certain floor levels not to be included (e.g., the level
4, 14, 24, etc. in Hong Kong).
36
Floors Below Ground
The number of floors below ground should include all major floors located below the ground floor
level.
2
# of Elevators
Number of Elevators refers to the total number of elevator cars (not shafts) contained within a
particular building (including public, private and freight elevators).
16
Top Elevator Speed
Top Elevator Speed refers to the top speed capable of being achieved by an elevator within a
particular building, measured in meters per second.
6 m/s
Tower GFA
Tower GFA refers to the total gross floor area within the tower footprint, not including adjoining
podiums, connected buildings or other towers within the development.
104,516 m² / 1,125,001 ft²
Rankings
-
By function
You must be a CVU Member to view this resource.
-
By material
You must be a CVU Member to view this resource.
#
4910
Tallest in the World
#
177
Tallest in
Europe
#
26
Tallest in
United Kingdom
#
24
Tallest in
London
Construction Schedule
2004
Proposed
2009
Construction Start
2014
Completed
Owner/Developer
Architect
Architect of Record
Usually takes on the balance of the architectural effort not executed by the "Design Architect," typically responsible for the construction documents, conforming to local codes, etc. May often be referred to as "Executive," "Associate," or "Local" Architect, however, for consistency CTBUH uses the term "Architect of Record" exclusively.
MEP Engineer
Design
The Design Engineer is usually involved in the front end design, typically taking the leadership role in the Schematic Design and Design Development, and then a monitoring role through the CD and CA phases.
Contractor
Main Contractor
The main contractor is the supervisory contractor of all construction work on a project, management of sub-contractors and vendors, etc. May be referred to as "Construction Manager," however, for consistency CTBUH uses the term "Main Contractor" exclusively.
Other Consultant
Other Consultant refers to other organizations which provided significant consultation services for a building project (e.g. wind consultants, environmental consultants, fire and life safety consultants, etc).
Other Consultant refers to other organizations which provided significant consultation services for a building project (e.g. wind consultants, environmental consultants, fire and life safety consultants, etc).
Cost
Façade
These are firms that consult on the design of a building's façade. May often be referred to as "Cladding," "Envelope," "Exterior Wall," or "Curtain Wall" Consultant, however, for consistency CTBUH uses the term "Façade Consultant" exclusively.
Material Supplier
Material Supplier refers to organizations which supplied significant systems/materials for a building project (e.g. elevator suppliers, facade suppliers, etc).
Material Supplier refers to organizations which supplied significant systems/materials for a building project (e.g. elevator suppliers, facade suppliers, etc).
Building Monitoring
Elevator
Façade Maintenance Equipment
Sealants
You must be a CVU Member to view this resource.
Owner
Current
LKK Health Products Group
Past
Canary Wharf Group; Land Securities PLC
Developer
Canary Wharf Group; Land Securities PLC
Architect
Design
Usually involved in the front end design, with a "typical" condition being that of a leadership role through either Schematic Design or Design Development, and then a monitoring role through the CD and CA phases.
Rafael Viñoly Architects
Architect of Record
Usually takes on the balance of the architectural effort not executed by the "Design Architect," typically responsible for the construction documents, conforming to local codes, etc. May often be referred to as "Executive," "Associate," or "Local" Architect, however, for consistency CTBUH uses the term "Architect of Record" exclusively.
Structural Engineer
Design
The Design Engineer is usually involved in the front end design, typically taking the leadership role in the Schematic Design and Design Development, and then a monitoring role through the CD and CA phases.
Halcrow Yolles
MEP Engineer
Design
The Design Engineer is usually involved in the front end design, typically taking the leadership role in the Schematic Design and Design Development, and then a monitoring role through the CD and CA phases.
Contractor
Main Contractor
The main contractor is the supervisory contractor of all construction work on a project, management of sub-contractors and vendors, etc. May be referred to as "Construction Manager," however, for consistency CTBUH uses the term "Main Contractor" exclusively.
Other Consultant
Other Consultant refers to other organizations which provided significant consultation services for a building project (e.g. wind consultants, environmental consultants, fire and life safety consultants, etc).
Other Consultant refers to other organizations which provided significant consultation services for a building project (e.g. wind consultants, environmental consultants, fire and life safety consultants, etc).
Cost
Façade
These are firms that consult on the design of a building's façade. May often be referred to as "Cladding," "Envelope," "Exterior Wall," or "Curtain Wall" Consultant, however, for consistency CTBUH uses the term "Façade Consultant" exclusively.
Landscape
Gillespies
Planning
DP9 Ltd
Material Supplier
Material Supplier refers to organizations which supplied significant systems/materials for a building project (e.g. elevator suppliers, facade suppliers, etc).
Material Supplier refers to organizations which supplied significant systems/materials for a building project (e.g. elevator suppliers, facade suppliers, etc).
Building Monitoring
Elevator
Façade Maintenance Equipment
Sealants
Steel
William Hare Group Limited
Videos
17 October 2016 | London
CTBUH Video Interview – Claude Bojer Godefroy
Claude Bojer Godefroy of Henning Larsen Architects is interviewed by Chris Bentley during the 2016 CTBUH China Conference. Claude discusses the design process for interior...
Research
01 January 2017
20 Fenchurch Street, London, UK
20 Fenchurch Street, located in the financial district of the City of London, was designed by architect Rafael Viñoly. The building has been nicknamed the...
Videos
17 October 2016 | London
CTBUH Video Interview – Claude Bojer Godefroy
Claude Bojer Godefroy of Henning Larsen Architects is interviewed by Chris Bentley during the 2016 CTBUH China Conference. Claude discusses the design process for interior...
13 January 2016 | London
Building Maintenance Units on 20 Fenchurch, London
This video shows the impressive solution devised by CoxGomyl to install Building Maintenance Units (BMUs) to maintain the facade on this distinctive curved structure designed...
27 October 2015 | London
Interview: Cormac MacCrann
Cormac MacCrann of Canary Wharf Group is interviewed by Chris Bentley during the 2015 CTBUH New York Conference at the Grand Hyatt New York. Cormac...
26 October 2015 | London
Challenges and Benefits of Integrating Public Space into Tall Buildings
The integration of publicly accessible amenities into tall buildings is a desirable approach to expand the use of a given building to ever-broader segments of...
12 June 2013 | London
Interview: 20 Fenchurch
Rafael Viñoly of Rafael Viñoly Architects is interviewed by Jeff Herzer during the 2013 CTBUH London Conference at The Brewery, London. Rafael talks about Battery...
11 June 2013 | London
Breaking the Mold while Embracing Context in Historic Cities
The pieces of architecture which we place in cities are not singular objects but parts of a greater whole – which, once existing, will either...
11 June 2013 | London
Interview: Building Systems
Vince Ugarow of Hilson Moran is interviewed by Jeff Herzer during the 2013 CTBUH London Conference at The Brewery, London. Vince talks about building systems...
11 June 2013 | London
Matching Occupier and Landlord Needs: Supply and Demand in Tall Buildings
As employee habits increasingly change and alternative workplace solutions become a reality, what do tenants want from their tall buildings and how is this affecting...
Research
01 January 2017
20 Fenchurch Street, London, UK
20 Fenchurch Street, located in the financial district of the City of London, was designed by architect Rafael Viñoly. The building has been nicknamed the...
26 October 2015
Challenges and Benefits of Integrating Public Space into Tall Buildings
Rafael Viñoly, Charles Blomberg & Marcos Blanes, Rafael Viñoly Architects
The integration of publicly accessible amenities into tall buildings is a desirable approach to expand the use of a given building to ever-broader segments of...
26 October 2015
The Promise of Public Realm: Urban Spaces in the Skyscraper City
Stephan Reinke, Stephan Reinke Architects
This paper will reveal the importance of integrating the Ground Plane, Mid-Level and Rooftop Urban Public Spaces in the City. We will explore the NYLON...
11 June 2013
The Special Nature of the European Skyscraper
Viewpoints: The London Conference
European architecture is at a crossroads. Its commercial and environmental realities are driving buildings ever-higher, but not all are convinced. In this article – contributed...
27 April 2012
Debating Tall: Is UNESCO Going Too Far?
Paul Finch, Architectural Review and UK Design Council; Marie-Noel Tournoux & Patricia Alberth, UNESCO World Heritage Centre
Controversy has erupted over development proposals in London and Liverpool in the UK, which UNESCO says will damage views of World Heritage sites. Critics counter...
05 November 2007
The Economics of Supertall Towers
Watts, Steve; Kalita, Neal & Maclean, Michael, Davis Langdon
This paper addresses global economic factors infl uencing the decisions leading to the development of super-tall towers, including population growth and urbanization, economic cycles and...
Learn more about the Council on Vertical Urbanism
Discover how vertical living is shaping the next generation of urban environments. Explore insights, research, and global leadership in vertical urban development