La Maison

Dubai
  • Facts
  • Login

    You must be a CVU Member to view this resource.

    Metrics
Height 386.5 m / 1,268 ft
Floors 105
Official Name
The current legal building name.

La Maison

Other Names
Other names the building has commonly been known as, including former names, common informal names, local names, etc.

La Maison by HDS

Type
CVU collects data on two major types of tall structures: 'Buildings' and 'Telecommunications / Observation Towers.' A 'Building' is a structure where at least 50% of the height is occupied by usable floor area. A 'Telecommunications / Observation Tower' is a structure where less than 50% of the structure's height is occupied by usable floor area. Only 'Buildings' are eligible for the CVU 'Tallest Buildings' lists.

Building

Status
Completed
Architecturally Topped Out
Structurally Topped Out
Under Construction
Proposed
On Hold
Never Completed
Vision
Competition Entry
Canceled
Proposed Renovation
Under Renovation
Renovated
Under Demolition
Demolished

On Hold

Country
CVU follows the United Nations's definition of Country, and thus uses the lists and codes established by that organization.

United Arab Emirates

City
CVU follows the United Nations's definition of City, and thus uses the lists and codes established by that organization.

Dubai

Address

Al Khail Road

Function
A single-function tall building is defined as one where 85% or more of its usable floor area is dedicated to a single usage. Thus a building with 90% office floor area would be said to be an "office" building, irrespective of other minor functions it may also contain.

A mixed-use tall building contains two or more functions (or uses), where each of the functions occupy a significant proportion of the tower's total space. Support areas such as car parks and mechanical plant space do not constitute mixed-use functions. Functions are denoted on CVU "Tallest Building" lists in descending order, e.g., "hotel/office" indicates hotel function above office function.

Residential

Height
Architectural
Height is measured from the level of the lowest, significant, open-air, pedestrian entrance to the architectural top of the building, including spires, but not including antennae, signage, flag poles or other functional-technical equipment. This measurement is the most widely utilized and is employed to define the Council on Vertical Urbanism (CVU) rankings of the "World's Tallest Buildings."

386.5 m / 1,268 ft

To Tip
Height is measured from the level of the lowest, significant, open-air, pedestrian entrance to the highest point of the building, irrespective of material or function of the highest element (i.e., including antennae, flagpoles, signage and other functional-technical equipment).
386.5 m / 1,268 ft
Floors Above Ground
The number of floors above ground should include the ground floor level and be the number of main floors above ground, including any significant mezzanine floors and major mechanical plant floors. Mechanical mezzanines should not be included if they have a significantly smaller floor area than the major floors below. Similarly, mechanical penthouses or plant rooms protruding above the general roof area should not be counted. Note: CVU floor counts may differ from published accounts, as it is common in some regions of the world for certain floor levels not to be included (e.g., the level 4, 14, 24, etc. in Hong Kong).

105

Structural Engineer
Design

The Design Engineer is usually involved in the front end design, typically taking the leadership role in the Schematic Design and Design Development, and then a monitoring role through the CD and CA phases.
WSP | Parsons Brinckerhoff
Developer
HDS Group
Architect
Design

Usually involved in the front end design, with a "typical" condition being that of a leadership role through either Schematic Design or Design Development, and then a monitoring role through the CD and CA phases.
Archgroup Consultants
Structural Engineer
Design

The Design Engineer is usually involved in the front end design, typically taking the leadership role in the Schematic Design and Design Development, and then a monitoring role through the CD and CA phases.
WSP | Parsons Brinckerhoff

Research

01 February 2021

Value Engineering of Barrette Foundations for Tall Buildings in the Middle East

Sujatha Manoj, Mott MacDonald Group; Deepankar Choudhury, Indian Institute of Technology (IIT) Bombay; Akash Sharma, Fugro

Large-diameter piles and barrettes are the two most common foundation types for tall buildings in the Middle East region, where ground conditions are challenging due...

See more

Research

01 February 2021

Value Engineering of Barrette Foundations for Tall Buildings in the Middle East

Sujatha Manoj, Mott MacDonald Group; Deepankar Choudhury, Indian Institute of Technology (IIT) Bombay; Akash Sharma, Fugro

Large-diameter piles and barrettes are the two most common foundation types for tall buildings in the Middle East region, where ground conditions are challenging due...

20 October 2018

The Middle East: 30+ Years of Building Tall

CTBUH Research

The Middle East region is hosting its first CTBUH International Conference since 2008. In that year, there were 119 completed buildings of 150 meters or...

Learn more about the Council on Vertical Urbanism

Discover how vertical living is shaping the next generation of urban environments. Explore insights, research, and global leadership in vertical urban development

Learn More

We use cookies to improve your experience on our website. Review our Privacy Policy for more information.